1. [Inkmirra](https://inkmirra.think3ddd.de/?lang=en)
2. [Guides](https://inkmirra.think3ddd.de/ratgeber?lang=en)
3. Photograph without glare

Guide: photographing tattoos

# How to photograph a tattoo without glare

Glare appears when smooth skin reflects light straight into the camera; by the law of reflection, the angle of reflection equals the angle of incidence. You avoid it by not letting the light come from the front, by using softer light or, with some equipment, by cross-polarisation.

Here you will learn why skin looks shiny in photos, and three ways to deal with it, from simple to elaborate.

By Inkmirra · Updated: 18 November 2026 · 4 min read

![Tattoo as a 3D scan: dotwork mandala on the forearm, rotatable 3D model (demo)](https://inkmirra.think3ddd.de/seo-images/tattoo-3d-scan-unterarm-mandala-800.webp)

Forearm mandala as a 3D model (demo model)

## Why skin looks shiny in photos

Physics distinguishes specular and diffuse reflection. On a smooth surface the light rays stay concentrated and are reflected in one direction; on a rough surface they are scattered in many directions.

The specular part is the bright spot in the photo. It is only visible from the direction in which the light is reflected. The NIST tattoo photography guideline explicitly lists reflections and large shadows over the tattoo as things to avoid.

## Way 1: no light from the front

- **No flash** – The flash sits next to the lens, so its reflection goes straight back to the camera. NIST advises that the flash should generally not be used.
- **Light from the side** – When light hits the skin at an angle, the specular reflection goes off to the other side, not into the lens.
- **Move the light or the body, not the camera** – For an undistorted picture the camera should stay parallel to the tattoo. So change the light direction or the pose rather than the camera angle.
- **Spotting glare** – If the bright spot moves when you slightly change the light or the pose, it is a reflection and not part of the tattoo.

## Way 2: softer light

The larger a light source is relative to the subject, the softer its light. Hard light makes direct reflections on skin more likely. Light becomes softer when it bounces off a surface or passes through a diffusing material:

- Indirect light: bounce the light off a bright wall or ceiling
- Diffuser: a curtain or a white sheet between the window and the skin
- Overcast sky or shade: reflections on smooth surfaces are weaker

## Way 3: cross-polarisation

For more elaborate shots, cross-polarisation is an option. A linear polarising filter sits in front of the light source and a second one in front of the lens, turned 90 degrees to it. Specular reflections keep the polarisation of the light and are strongly reduced by the lens filter. Diffusely reflected light loses it and passes through.

This costs light: the diffuse part becomes at least 1.3 stops darker, which a bright light source compensates for. To align, rotate the lens filter until a highlight, for example on a metal spoon, disappears.

A single polarising filter on the lens alone also reduces reflections, but to a different degree depending on the angle, and never completely.

Important

## Shine from a film or covering

A smooth film reflects like any smooth surface. Whether and when a covering comes off is up to your studio, not the photo. For any complaints, see a doctor.

## Step by step without glare

1. **Flash and lamps off** – Only one kind of light, no flash.
2. **Light from the side or indirect** – Window to the side, light bounced off a bright wall or through a curtain.
3. **Test shot** – Camera parallel to the tattoo, take a picture and look at it.
4. **Check for reflections** – Slightly change the light or the pose: if a bright spot moves, it is glare.
5. **Adjust and shoot again** – Change light or pose until the spot disappears, then take the final photo.

## Glare in a 3D scan

Shiny surfaces are difficult for photogrammetry too. The Metashape manual advises avoiding shiny, highly reflective objects or capturing them on a cloudy day. Polycam recommends even, diffuse light and names harsh shadows and bright reflections as problems.

[Guide: filming a tattoo for a 3D scan →](https://inkmirra.think3ddd.de/ratgeber/tattoo-filmen-3d-scan?lang=en)

## Related features

- [Tattoo photo check](https://inkmirra.think3ddd.de/tattoo-foto-check?lang=en) – Check your tattoo photos.
- [Scan a tattoo](https://inkmirra.think3ddd.de/tattoo-scannen?lang=en) – From a phone video to a 3D model, no app.
- [Tattoo journal](https://inkmirra.think3ddd.de/tattoo-tagebuch?lang=en) – Photos, notes and scans for each tattoo in one place.

## Sources

General statements in this guide are based on these sources. Statements about Inkmirra describe the app's features.

1. [The Physics Classroom: The Law of Reflection](https://www.physicsclassroom.com/class/refln/Lesson-1/The-Law-of-Reflection)
2. [The Physics Classroom: Specular vs. Diffuse Reflection](https://www.physicsclassroom.com/class/refln/Lesson-1/Specular-vs-Diffuse-Reflection)
3. [NIST: Tattoo Recognition Technology – Best Practices (Tatt-BP), Guidelines for Tattoo Image Collection, Revision 1.0 (2016)](https://www.nist.gov/document/tatt-bpinstructionalslidesr1pdf)
4. [Cambridge in Colour: Introduction to Portrait Lighting](https://www.cambridgeincolour.com/tutorials/portrait-lighting.htm)
5. [Cambridge in Colour: Making the Most of Natural Light in Photography](https://www.cambridgeincolour.com/tutorials/natural-light-photography.htm)
6. [Paul Bourke: Cross polarisation in photography (2022)](https://paulbourke.net/miscellaneous/crosspolarisation/)
7. [Cambridge in Colour: Polarizing Filters](https://www.cambridgeincolour.com/tutorials/polarizing-filters.htm)
8. [Agisoft Metashape User Manual, Version 2.0, Kapitel 2 „Capturing scenarios“](https://www.agisoft.com/pdf/metashape_2_0_en.pdf)
9. [Polycam Help Center: Preparing to Scan](https://learn.poly.cam/hc/en-us/articles/48538689020692)

[← All guides](https://inkmirra.think3ddd.de/ratgeber?lang=en)

## Questions about glare

### Why does the glare disappear when I move the light?

By the law of reflection, specular light is reflected at the same angle at which it arrives. If you move the light source, the direction of the reflection moves too, until it no longer reaches the lens.

### Why should I not use the flash?

The flash comes from the camera's direction, so its reflection on smooth skin goes straight back into the lens. The NIST tattoo photography guideline advises that the flash should generally not be used.

### Do I need a polarising filter?

Not necessarily. Light direction and soft light come first. Cross-polarisation needs two filters and its own light source, but strongly reduces specular reflections.

### Is a polariser on the phone camera enough?

A single polarising filter on the lens reduces reflections, but to a different degree depending on the angle and never completely. For the strong effect of cross-polarisation you also need a filter on the light source.

### Does this also apply to a 3D scan?

Yes. Photogrammetry software manuals recommend even, diffuse light and warn about shiny surfaces and bright reflections.

## You might also like

- [Guide: photograph a tattoo](https://inkmirra.think3ddd.de/ratgeber/tattoo-fotografieren?lang=en) – Light, angle, distance and background: the basics of tattoo photos.
- [Guide: photograph with your phone](https://inkmirra.think3ddd.de/ratgeber/tattoo-fotografieren-handy?lang=en) – Lock focus, flash off, zoom instead of moving close: the settings.
- [Guide: film a tattoo for 3D](https://inkmirra.think3ddd.de/ratgeber/tattoo-filmen-3d-scan?lang=en) – Light, distance and movement for a good 3D scan.
- [Scan a tattoo](https://inkmirra.think3ddd.de/tattoo-scannen?lang=en) – How-to: scan a tattoo in 3D from a phone video, no app.
- [Tattoo journal](https://inkmirra.think3ddd.de/tattoo-tagebuch?lang=en) – Notes, photos and 3D scans for each tattoo, with reminders for comparison scans.
- [Guides](https://inkmirra.think3ddd.de/ratgeber?lang=en) – Photograph tattoos, document healing, build a portfolio: how-tos and tips.

---

Source: https://inkmirra.think3ddd.de/ratgeber/tattoo-ohne-spiegelung-fotografieren?lang=en · Inkmirra, a service by think3ddd (Jacobi & Myadam GbR) · Updated: 2026-11-18
